Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...back of the tray it sometimes thinks the trays are still full. try giving the contacts a good scrub and put the trays back Did you find a solution to this? Same thing happened to mine and even after ...
Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...back in, it tells me to empty them. I cleaned the insides where the tray sits and cleaned the contacts. What next? You need to clean behind/around the tabs where they reach into the tray. I have this ...
Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...unplug unit, clean any contacts within the unit. Make sure the tray is also clean, particularly the metal leads at the back of the tray. The sensor is probably filthy vlean that it schould go ...
back if you don't fix the fault, in my case always the grinder. 1) DISCONNECT THE MAINS. 2) Take the drip tray out, open the plastic side panel (door) on the R/H side of the machine (the grinder unit)
tray on the top by removing the 2 (smaller) Torx screws. Next pull straight back on the top panel and it will disengage. Remove the reservoir side panel by sliding it up and it will disengage. Now, on
Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...tray underneath instead of the cup. I found the problem to be the drain valve after taking the whole machine apart. this part was cracked in my case which meant that the water did not come out the ...
Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...tray I had the same problem, coffee coming out of one nozzle or sometimes from the middle btw. the 2 nozzles. It turned out to be dirt in the front unit that holds the nozzles. I removed the silver ...
Question about Bosch Benvenuto Coffee Makers & Espresso Machines
...tray and look w/mirror). Once you depress that with a knife/fingernail/screwdriver, you can pry the cover of that assembly toward you on the bottom. Insert a screwdriver in the resulting slot on the ...
...tray back in so I removed the brew unit. I'm still having a problem getting both the brew unit and the dump tray back in the machine. what should I do? you have probably removed the tray during the ...
...tray back without the grounds container (b/c it is higher; that's what can't get past the flap). Make a cup of coffee, letting the grounds fall into the tray. Normally, after you do that, the machine ...
75 questions posted
Usually answered in minutes!
69 Questions
21 Questions
4 Questions
1 Questions