TUB DRAIN. iT WAS NOT WORK RIGHT. I TOOK OUT THE WHOLE THING THINKING IT WOULD WORK, BUT THE WATER STILL DOES NOT GO OUT. iT IS HARD TO SEE AND GET AT THIS TUB. i NEED HELP FIXING THIS. I take it that
...for a standard tub drain assembly. The brass and copper flex assembly i bought is about 2 inches short. Can I get a brass extension piece and what is it called? yes,1 1/2 in slip tail piece ...
Question about American Standard Plumbing
...drain in the tub. How Can I tell if thats the problem? Take screws out of plate on tub over flow and pull up trip lever. sometimes they move and need adjusting . It shoul dhave 2 bolts holding the ...
drain. Tub is early 1900s. Drain kits seem to come in 1 1/2'' only. Prefer oil rubbed bronze, but will be happy to find any thing at this point. Also looking for a hole plug 1 3/4'' for this same tub.
...tub drain the most common reason for a drain to leak is that the plumbers putty around the drain where it meets the sink or tub has dried out and has a crack or void in it. Unscrew the drain from ...
Question about Kohler Plumbing
...tub drain and replace the necessary parts. Your issue is showing up because the gallons per minute/hour rate that the tub drains is far greater than the tub valve is allowed to fill the tub. This ...
...tub drain i acquired a beautful 6' fiberglass eljer garden tub that had never been installed before. i understand about setting it, and building the deck surround to install the faucet, etc. but what ...
Question about Moen Plumbing
...reinstall a water drain stopper in our tub that was pulled out? if it is a lift and drain then you have to use a screw driver to screw the biggest part in first then the smaller part screws into
...tub drain w/ the Danze lift and turn tub drain conversion kit- how do i remove it from the part that stays in the tub? I just want to put the pull into the existing plug and my original one just ...
Question about Maax Plumbing
tub. The drain is not a pop down, pop up deal. You push in a button in the overflow to raise the drain plug. But the vacuum of the drain pulls it down again. So you have to hold the plug in the entire
3 questions posted
Usually answered in minutes!
136 Questions