...to refill after a flush would there be a certain part that is plugged or wore out ? Is the flapper valve slow to return to the closed postion allowing water to flow through the flush valve? Make
Question about Fluidmaster Home
Ive replaced 3 toilet fill valve with 440a Fluid master fill valves height is good water level good.After a while it sounds like there is leak by from all toilet.Flappers have been replaced. What coul
...figure out how to fix it because its a old dux cistern ???? can only be one of 2 things. the inlet valve is not shutting off properly and so the tank is overflowing into the toilet bowl or the flush ...
HOW TO SET WATER LEVEL GLACIER BAY TOILET SET WATER LEVEL IN TOILET TANK There should be a adjustment screw at the top of the fill valve, screw it up or down to adjust the tank level.
...and the bowl empties slowly, then slowly refills. It sound like you have debris caught in the fill valve. Remove the top where the washer is and put your hand over it and slowly turn the water on to ...
Igenium Flushing valve will not shut off. I have an Kohler toilet with the ingemium flushing system. The toilet worked fine up until yesterday. The problem is that the fill valve will not shut off ...
...is flushed. How can this be fixed? The sound is from the high water pressure squeezing thru the valve in the tank. The pressure can be reduced by partly closing the valve under the toilet tank.
water level in toilet bowl is low adjust fill valve turn the water off to the toilet push down on the tension clamp and pull the valve up higher then resecure
Question about Toto Home
...onto our bathroom floor we know where the leak is someone have put silicone around the plastic valve right @ the bottom of the toilet tank it looks like a white plastic thingie with the hole of ...
6 questions posted
Usually answered in minutes!
50 Questions
35 Questions
40 Questions