...clean and charge unit does not work If it simply does not work at all, the circuit board is probably damaged. This is not repairable and you will need to buy a replacement. You will find a new clean ...
clean/charge base and plug the cord directly into the bottom of the shaver. If it charges directly from the cord, it is a safe assumption that the clean/charge base is not working correctly. This unit
...charge or clean in the base When I place my shaver in the base the auto select modes for cleaning status will not light up. It will also not charge in the base. The light indicating the status of the ...
...available. You will need to purchase a new base. You will find them for sale at shaveroutlet.com. See link below ...
clean? Does the charge light on the razor come on when the shaver is in the base? The base communicates with the shaver through the charger contacts, so if you don't have good contact the shaver won't
...clean/charge, the motor whirrs for a couple seconds, clicks off and the base then says that the cartridge is empty. I tried another cartridge, same problem. Any suggestions? I had the same problem. ...
...would like to replace your clean and charge machine, you will find this item for sale at shaveroutlet.com. See link below ...
...plugged up at the base. Take the cartridge out and turn it upside down> next clean the openings with a cotton swab< it make take a while as it can get gummy> That should fix the ...
...clean and is stuck on cleaning cycle (normal light blinking, no charge) I then remove the shaver and put it back in and it shows clean and begins charging... The circuit board on the shaver may have ...
...Clean Charge Base I have the same braun shaver and what I found was the arm was not complete attached to the top part of the charger base. I have included a video and some pictures. Warning be very ...
51 questions posted
Usually answered in minutes!
132 Questions
101 Questions
74 Questions
40 Questions
36 Questions
