Panasonic Cordless 12V Compact Impact Driver Kit with 2 High Capacity 3.5Ah Ni-MH Battery Packs "batterie drill works reverse" Questions

works fine in forward but will not go in reverse Hilti SF 121-A battery drill. the drill was working both in forward and reverse but now will only operate in the forward rotation. Assuming that it's ...

...drill no longer works, the reverse switch does not move. You have burned out the drill motor, it is shorted, the battery smoked due to a direct short, one thing I don't understand why the thermal ...

my 24v new makita drill doesnt hold charge the new batteries now have a little computer in them, so to speak. when you plug in the battery to the charger and you get the alternate flashing light the ...

drill will not maintain enough power to screw a plastic electric cover plate on Likely your battery has reached end of life. Replace, but first check that your charger is working. Many people run the ...

...drill is stuck in forward and the button will not change to off or reverse. As soon as I put in a battery off it goes. Also one on the 14.4 drills will only go into reverse and offf too. Well burning ...

...drill won't work even after charging battery. Try working the switches Low/High, Forward/Reverse. Sometimes, the battrey can hang up a bit in the charger, resulting in a low, or no charge. Try a ...

...reverse than the cell's remaining internal forward voltage.  This results in the reversal of the weak cell's polarity while the current is flowing through the cells.  "Pushing the ...

...works fine. The back to reverse and for the first trigger pull it will stay in forward. I release and pull trigger again and if will go into reverse mode. What is causing this. It has happened since ...

...drill is not in forward or reverse and when you press the trigger nothing happens. See Page 15 of this PDF for more information. 4. If none of this works, there is a Recall for that Battery Unit. ...

...reverse or forward...am i forgetting something? Check the conections on the battery and drill aren't tarnished. This is a common problem which prevents drills from operating. The contacts can be ...