Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill "drill batteries polarity" Questions

Ad

...drill died. The batteries are dewalt 18v xrp batteris I am thinking the switch or motor is bad, check the switch first. you can locate parts at dewaltservicenet.com. Make a wiring diagram before ...

Ad

Question about Porter Cable Drills

1 Answer

...drill easier troubleshooting if you have multimeter.. set your multimeter to 25V DC range, then look for the polarity for the adaptor.. put your probe to it,if it shows reading,then the battery at ...

Ad

drill to get to the battery so I can replace it? Just unscrew all the screws holding the case together, not just the handle part. Gently split the case in half to get to the battery in the handle part

...drill model no. pcd-2400b. model no. of battery charger is Powercraft pcdl-24001 or 9144 try this mate should be ok if the cradle is no good the guppins will be just swap them over and make sure you ...

...drill. I have 3 batteries and two chargers. Every time I charge the batteries they show yellow and green ,but are not charged. They will not operate my drill. Plaese help me with this. Thanks, Andy ...

...drill. What is damaged and is it repairable ? (I had loosened screws on handle to clean battery contacts, needs doing regularly on this model. Inserted battery to check it was contacting, but as the ...

drill it's working for a bit then stopping and starting You can get it working sometimes if u mess about with the trigger it sounds like you have a problem with the switch or battery. Try cleaning

Question about Makita Drills

2 Answers

...drill and on battery. I have a few Makita's with the old 'stick' type batteries - this is a regular problem. You need to open up the handle and clean the contacts, also clean the contacts on the ...

when i put the battery on the recharger, the green light and the yellow light comes on and our battery wont recharge Wait for cool down...if that does not work the battery is damaged. If the battery ...

Question about Porter Cable Drills

1 Answer

...drill battery Get a volt meter and make sure red is on v/ohm and black cable plugged into common or ground. measure the battery. if the meter is reading a negative reading then polarity is backwards. ...

Not finding what you are looking for?
Makita 2 Bl1830 18v Battery,dc18ra Charger Lxt Fr Drill Logo

140 questions posted

Ask a Question

Usually answered in minutes!

Top Makita Drills Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Makita Drill Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...