battery stuck I can not get the Dewalt 18V battery off the circular saw it is stuck the clips seem to work but the battery will not move any ideas? I would remove, or at least loosen the housing ...
...battery is stuck on our job was dusty and we slid the charged battery on used it till it needed to be charged and know the battery is stuck to the drill. maybe some dust is not allowing the battery ...
both batterys show fault after only 1 year, drill has 2 gears out and chuck is stuck Well, Christmas is coming.....
...drill is stuck in reverse My Makita drill has gotton itself stuck in reverse HELP! I am right in the middle of putting up a new ceiling! Use left hand screws.....or take housing apart to see what has ...
...go online and see if there is a recall on the battery that you have and see if they can help, or you just may be stuck having to purchase another battery or possibly another drill
...drill bit is stuck I drilled a large hole for power cords and know the drill will not self release the bit. How do I do it ? When this happened to me I held the shaft of the drill bit tightly with my ...
...stuck open and they are commonly replaced on the higher end "Industrial Grade" Power Tools like DeWalt and Milwaukee. Looking at the Make and Model of your drill it would probably be easiest and most ...
Drill, Keyless Chuck stuck in full open position. Black and Decker Cordless Drill, Model # CD140G, Date Stamp 20041952. Keyless chuck is wide open and stuck, won't budge. Any remedies? Thanks if chuck
...the normal way. Put the drill in reverse. Hold the outside ring very firmly and slowly run the drill (in reverse direction). It was stuck. After about 5 bursts on the trigger, it finally came
...battery in my new drill how do i remove as ir seems stuck Most batteries are held in place by one or two clips. Make sure these are depressed and then try sliding the battery off the drill. It is ...
30 questions posted
Usually answered in minutes!
160 Questions
91 Questions
17 Questions
16 Questions
