...drill setting with the speed on 1 will give the power to free the bit. If the clutch will not engage, GENTLY but firmly switch between forward and reverse. This should work just fine. I hope this ...
Question about Drills
...drill is not working. the chuck is will not open and close. you cannot move the front and back sections independently so you cannot tighten a drill bit. How can I loosen the two sections?? Hold the ...
switch for forward and reverse only opperates in makita 14.4 cordless drill.only works in reverse your transmission has gone out
dewalt dc926 hammerdrill chuck do not stay lock in reverse my hammer drill works on forward but unlocks on revers chuck should be replaced to parts # 33007575 newer style.
My drill will work in reverse but not forward. Any suggestions? The directional switch is bad and will need to be replaced
Question about Hitachi Drills
...just replaced the housing on my Hitachi driver drill (DS18DL) after it cracked and now the drill won't work in forward bit reverse is fine. Any ideas? check the wiring connections to the for/rev ...
...drill operate in forward w/a battery that is not fully charged but yet good.? Could also be a faulty switch, only working in one direction. Also check to make sure the forward/reverse lever is ...
Question about Dewalt Drills
it will work for a few seconds then stop and keeps doing that. why? I'd be looking for a defective forward/reverse switch, or a bad connection/wire on the forward side between the switch and the motor
...drill was working both in forward and reverse but now will only operate in the forward rotation. Assuming that it's within 2 yrs old, you can phone Hilti re getting it fixed under warrenty. Hilti has ...
Question about Panasonic Drills
...forward/ reverse switch is hanging up and the rotation of the drill is switching it, then it changes direction. The switch needs a little TLC and a good cleaning. Blow it out. EY7540 14.4 volts. Both ...
9 questions posted
Usually answered in minutes!
5 Questions
3 Questions
5 Questions