Craftsman 10" Table Saw "motor hums turn" Questions

Ad

...motor is overheating and will burn out. Turn saw off. Use hand and manually rotate blade to see if it rolls free. For example on my saw, the blade barely turned because a bearing was rusted. I soaked ...

Ad

...MOTOR HUMMING BUT NOTHING WILL TURN The belt has either come off the pulley or the belt is slipping. Open th top access hatch and check the belts . If belt is off replace and tighten , if it is just ...

Ad

Question about Craftsman Saws

1 Answer

...turn. If not the motor shaft could be turning inside the pulley. Make sure the pulley is not loose on the motor shaft. If the motor just hums without spinning it has an internal within the motor ...

...motor won't turn the blade w/o help (i.e. me spinning the blade) and once it is running it will die down to a stop and hum untill I pull the work away. Could replacing the motor and using the ...

...walnut, and hums when switch is turned on Does the motor and saw turn freely? If ok, then likely the motor start/run capacitor has failed. It is usually mounted on the outside of the motor

Question about Craftsman Saws

2 Answers

...motor hums but does not turn the blade. The motor model number is 113.12171. Can this be fixed or do I need a new motor? That is the selinoid..it needs replaced..if it is not under warranty  ...

and the motor just hums when you turn it on. did you recently rewire this motor? If so recheck the wiring. If not sounds like you have a problem with the starter windings or switch in the motor itself

Question about Craftsman Saws

1 Answer

...motor hums but will not start. The breaker then trips. Motor model number is 131 12171. Motor is manufactured by Mallory and is 1 hp. Manufacture model number is K 395FN 1047. Hi, The capacitor may ...

Question about Craftsman Saws

1 Answer

turn the motor on and VERY CAREFULLY turn or bump the arbor in the direction it is supposed to turn. If the motor spins up to speed you have a bad start capacitor. I have never been able to find start

Motor hums but blade will not rotate When I turn on the motor blade moves about a 1/4 inch and then stops though the motor keeps humming. Cleaned out insides, removed brake switch and reinstalled it. ...

Not finding what you are looking for?
Craftsman 10" Table Saw Logo

473 questions posted

Ask a Question

Usually answered in minutes!

Top Craftsman Saws Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Craftsman Saw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...