Kirby Heritage II Vacuum "spinning belt" Questions

Ad

...spinning and you begin to smell burning rubber. Belt not broken. ?????!! belt doesnt have to be broken, check the metal arm on the vacuum, see if there is build up of old rubber from previous belts, ...

Ad

spinning, this is the reason why your belt continues to break. If the brush can not spin, the motor shaft will continue to try and spin the belt, but since the brush doesn't spin, and the belt doesn't

Ad

...spinning on mine even if the flat belt is broken and the v belt loose shouldn't the shafts or something be spinning when I flip it over and turn it on? Nothing is spinning on mine There is a ...

Question about Dirt Devil Vacuums

3 Answers

Eats belts immediately Belt is immediately sheered through by "motor arm" (not sure what to call it - just the opposite of the roller brush end). Motor arm is rough and sheers though the belts ...

...belt is spinning fine until I lower the handle to start to vacuum and then the belt stops spinning. As soon as I put the handle back in the upright position the belt spins again. Sounds like belt is ...

why wont the brushes spin on vacuum cleaner? tt5000 First, check to make sure that the roller is not hindered by a pulled string such from a carpet. Next check the BELT that drives the pulley. If the ...

Question about Hoover Vacuums

1 Answer

...belt turns when I turn the brushes on, and the brushes will spin. The problem is that when I do this on carpet, the brushes stop spinning. As soon as I pull the "head" off the carpet, the ...

My Eurika 4D bagless upright will not pick up anything. The belt is not broke but the roller won't spin and there is verry little to no suction. Still makes all the notice but won't roll as easily You

...spinning, but not the belt. The belt may look fine but it is stretched. The silver stem is the motor shaft. Replace the belt with a genuine one by model #. It will be 20-30% smaller. Check that your ...

Question about Hoover Vacuums

1 Answer

I have a hoover cyclonic whisper model #U5184900. The beater brush will not spin when the belt is attached. I have removed the brush and after removing blockage I am able to spin the brush freely when

Not finding what you are looking for?
Vacuums Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...