Kirby Heritage II Vacuum "roller working" Questions

roller was working and then suddenly stopped. What else can I do? is there anything jammed underneath.can you turn the brush roller by hand.if not then take it back where you bought it.sounds like you

...roller is heating up correctly but the rollers are not spinning, there may be a few different causes. Check to make sure that the rollers are properly lubricated. If they are dry or dirty, they may ...

Roller wont spin The bursh roller will not spin but all other hook up work fine. We just cant get the main vacuum to work... what should we do? is there hair, strings, twine wrapped around the roller?

...working properly. When I press the roller button ( on carpet) it makes a whistling noise and wont clean carpets well. When I dont press the button vacuum does not make noise and works but that's only ...

...roller and the belt appears fine. The toothed rotor doesn't spin, but can't verify if the on-off switch is working either. the pedal on the left turns the brushroll on and off You havE a Windtunnel ...

The belt for the maain vaccume broke off and now with the new belt the roller will not work. It sounds like your roller brush itself might be bad. Try holding the roller brush holding just the end ...

Roller I recently removed my roller to cut all the hair off it and when I replaced it everything snapped right in but when I turned the power on the power worked but the roller wouldn't turn Hi. Did ...

Roller quit working - but belt still attached try turning the rollers by hand,,, if they turn,,, can you hold the rollers and still turn the belt,,(dont turn on the motor) ,,, if so,, its the belt ...

...roller working once more, find the level plate on the base of your vacuum cleaner. Expel the screws that safe the plate to the vacuum cleaner, at that point evacuate the screws and the plate. Force ...

The Dyson roller ball vacuum I have is making me crazy because the roller bar wont turn. What gives? Check that you dont have anything blocked in the roller, if all is clear there is a little red ...