Kirby Heritage II Vacuum "put belt back" Questions

...belt is too tight to put back on i cant get the self propel belt back on my sweeper. please advise the best way to install it is to put it on the motor shaft first and then to start putting it on the ...

put the belt around the roller, put back in and replace plate, you need to make sure the belt is on the roller correcty, make sure is at the red position when putting the part back on with the belt on

...put the belt over the roller and re-install it, then put the bottom plate back on, then turn it over, undo the motor and put the belt on the motor pulley, re-install the motor and put the rest back ...

...it? flip it upside down , undo 2 phillips screws, flip top up and off from the back, lift out roller , replace belt , stretch back in place , put top back on starting with front lip, then put in ...

...put on the belt on the brushroll, put the brushroll into the housing making sure the marks on the end of the brushroll are the same. Take the spin dial in the front and "hook" the belt till the dial ...

...put belt around right side of bar then slideit back in and pull the belt twords back you will see a metal pin it goes around it will be tight but not hard to do. spin the bar to make sure you have ...

...put the belt on the deit devil breeze how to put the belt on the dirt devil breeze badless Here is a detailed discription on how to change your belt. Turn the machine compleatly upside down and place ...

...the bottom plate on then turn the big knob on the from until it locks(it will catch the belt)put the nozzle back on the vac, lock it down, and turn the knob to release the belt unto the motor

...Put the new belt over the wooden pulley on the roller and put it almost back in. Put the other end of the belt over the motor shaft. Stretch the belt by returning the roller to its slot. Put the sole ...

...properly when I put the power drive back on. make sure the belt is on the belt lifter look in hole on back of head once head is locked on power plant turn belt lifter clockwise to put on ...