Kirby Heritage II Vacuum "beater bar working" Questions

beater bar that needed to be replaced. My beater bar has stopped working and I have tried all the normal causes; reset button, trying the beater bar with each segmant of the wand. Is there a fuse? and

beater bar won't turn If you hear the motor in the head running and the beater bar isn't rotating, you probably need a drive belt. With the power off, make sure you can rotate the beater bar freely by

...beater bar brush. Turn it over and use a screwdriver or knife, and run it the full width of the beater bar to remove the hair and string and other debris that get wound up on the beater bar-NOTE you ...

...beater bar, look for release tabs to open the plate. Flip them and set the plate to the side. The beater bar rides in sockets. Remove the bar, install the new belt around the motor shaft, then work ...

Beater bar not working on Halo vacuum I've had this problem before, but usually the beater bar wasn't working because the door where the hose attaches isn't closed properly and so the suction isn't ...

...beater bar side up. Remove the cover base plate that surrounds your beater bar. It's held on with either clips or screws, and usually "hinges" toward the front of the vacuum to release when the ...

beater bar switch on the top of the unit next to the on/off button does turn the green light on/off as it should, and the bar will turn(with a bit of resistance) by hand. (& yes I have tipped the body

...beater bar side up. Locate the catches or screws that hold the plate on that covers the beater bar. Remove the plate. The beater bar sits in sockets where it attaches to the vacuum, so remove ...

...beater bar stooped working The beater bar on my miele model SEB217-3 stopped working, the belt looks fine and moves freely by hand. When i turn the switch on at the top to the wond the light on the ...

beater bar has stopped turning I caught the edge of a rug in the beater bar and it has stopped working. I have pushed the reset button but that has not helped. the suction still works, the beater bar ...