Kirby G5 Bagged Upright Vacuum "unclog sink" Questions

...turn it inside out.It's now ready to use.If you are trying to unclog a dual (kitchen) sink,make sure the other side has the stopper firmly in place so that there is a seal for the entire drain ...

...unclog it? Try suctioning clean water from a sink or bucket with the attachment removed from the hose. If the attachment is clogged, soak in hot tap water for 30 minutes and clean the end with an old ...

...sink. This will eliminate any leftover CLR residue and clean the nozzle thoroughly. For the intake (suction part of the tank) I just rinsed through the lines with the vinegar mix and it seemed to ...

...unclog drains. Can you please briefly give me the basic steps when doing this? What attachment(s) are used? How is the vacuum configured? ***Also - My Kirby is actually (according to the front label ...

...sink snake to unclog the "pipe". I thought it was the pipe on the right hand side (when you're looking at it) which needed to be unplugged. There was a little in that size, however we retrieved the ...

unclog it? Try a warmed up pin or paperclip the plastic may not have been punctured when it was unmolded during the manufacturing process or return to the store for another one. Hello you can try this

...there was the grey pump that pumps steam to the mop pads was clogged with hard water build up and unclogged the pump and it worked right away... take your steam mop head to the sink.  Get good ...

...sink/drain auger. Worked like a charm! Use a small mirror (like a dental mirror) and a flashlight to see a little ways into the hose if you want. Finally, run the auger all the way thru to make sure ...

...sink. This will eliminate any leftover CLR residue and clean the nozzle thoroughly. For the intake (suction part of the tank) I just rinsed through the lines with the vinegar mix and it seemed to ...