nthing happens when I hit the swithch i think the switch is bad, I ohm out the motor, the brushes look good. Probably the switch but also check the selector for the forward and reverse as it may be in
...hammer under load Drill will rotate but will not hammer most of these types of tools have a manual switch it will be located on the body of the drill just behind the chuck on top or bottom or oposit ...
...drill dual mode - 2 hours Makita HP1640 hammer drill dual mode - 2 hours brand new. The slider switch will not move to rotary mode; stays on hammer mode. Exchanged Makita HP1640 hammer drill for ...
Question about Makita Drills
makita hr3000c runs only at full speed, have changed the contoller but still the same If its a variable speed switch and only running when fully depressed, its in the switch
bosch rotary hammer switch wired backwards? Is the black wire #1 and the white wire #2? If the drill runs backwards just swap over the two wires on the switch front left with rear right.
Question about Makita Drills
MAKITA HR3000C HOW DO I REMOVE THE HAMMER/DRILL MODE CHANGE SWITCH REPAIRING MAKITA HR3000C AND I CANT GET THE DRILL/HAMMER MODE CHANGE SWITCH OFF The big control levers off, but the small one only ...
...11227e rotary hammer will not energize when the bosch 11227e roto hammer will not energize when the switch is squeezed. Then at other times it will work but not full power. I also thought I smelled ...
Question about Dewalt Drills
What could have cause the drill from spinning with the selector switch in the drill and hammer mode/ While drilling 1/2inch holes for wedge anchors the drill bit stopped spinning but the hammer action
i got a bosch 11236vs has no power to hammer. was working fine last time i use it. did the switch go bad? can't be the brush because i don't think i used it enough. It still look almost breand new. ...
switch problem, where can i get new one www.toolpartsdirect.com just make sure you have the correct model...i linked it to the bosch 11236vs you can also get it directly from bosch the part number ...
1 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions