Kirby G6 Bagged Upright Vacuum "roller spinning" Questions

...roller is heating up correctly but the rollers are not spinning, there may be a few different causes. Check to make sure that the rollers are properly lubricated. If they are dry or dirty, they may ...

My Eurika 4D bagless upright will not pick up anything. The belt is not broke but the roller won't spin and there is verry little to no suction. Still makes all the notice but won't roll as easily You

...roller not spinning. Belt is good motor on top turns on has suction, also the motor that spins roller is good. I tested it with power source directly to it and it does spin off the vacuum but when I ...

brush roller on windtunnel won't spin Hoover self propelled windtunnel w/bag, Model U6445-900..the brush roller won't spin. It appears that the small roller that should move into place to put tension ...

...roller brush to ensure that it spins freely by holding the very end of each side, also called the bearing caps with just your finger tips. Try spinning the brush with your thumbs. The brush should ...

with a Bissell belt. I ordered it from them so I know it's the right one. I replaced it and the roller won't spin and the belt smells like it burning. I replaced my Bissell vacuum cleaner belt

...the belt an the brush still won't spin I'm not sure what else to do. Lubricate each end of the roller brush with motor oil. Bearings inside the roller brush need lubrication for the brush to

Roller wont spin The bursh roller will not spin but all other hook up work fine. We just cant get the main vacuum to work... what should we do? is there hair, strings, twine wrapped around the roller?

...the left turns the brushroll on and off You havE a Windtunnel air vacuum cleaner. If the brush roller isn't spinning and the switch is on, you need to pull down the handle to make the roller turn

...check it again. Check the plastic where the belt is running for burnt spots. Also check the brush roller sometimes the tension from a new belt can finish off what was left of the bearings and cause ...