Kirby G4 Bagged Upright Vacuum "vacum power switch replacement" Questions

Ad

Question about Fantom Vacums Vacuums

2 Answers

Power Switch for Fantom Lightning My main power switch (toggle) is defective, and I need a replacement. Markings on it show it is 13A, 125V AC switch marked SE4 T85. Can this be purchased online, ...

Ad

Question about Kirby Vacuums

1 Answer

...vacum does not start when I plugged in and push the star switch. Last time we used it it work fine. there is power in the electrical oulet. what could it be? Reason number 1 (not sure why Kirby Co. ...

Ad

...will not start when the on/off switch is DC07 Animal Vacum will not start when the on/off switch is pressed. try replaced power switch part no:910971-01 if unit in warranty send service for

...vacum mainboard (pcb). Now my internal battery is directly connected to the 2 motors using a simple switch to powering on and off. The original pcb is conected only to the batery, recharghing wires ...

power switch, and two on the front of the housing under the headlight. Remove the power cord, and then you can lift the rear housing from the main body. Now you can remove the screws from the front of

Question about Dyson Vacuums

1 Answer

...vacum as close to the wheels center of rotation as much as possible. This should allow you open the clamshell like case. Once inside you can test the power switch and connections. My switch tested ...

Question about Fantom Vacums Vacuums

1 Answer

...power switch from another 120V product should work as long as the wires match. If you have a normal 2 wire switch, you should be fine. Be sure the amps on the new switch match the old and the ...

Question about Kirby Vacuums

1 Answer

...switch, the power cord, and the power assembly that the cord plugs into underneath the bag in the main part of the body. One of the problems the G3 had was where the cord plugged into the body--the ...

...vacum is 11 years old? What do you suggest You can replace the carbon brushes and most repair shops should have them. Also tho, the armature could be causing the problem, if you put in new brushs and ...

power switch is stuffed you may need to replace it... some vacums with foot switches to turn on and off get broken due to people standing on them to hard etc.... it bends the contacts in the switch...

Not finding what you are looking for?
Kirby G4 Bagged Upright Vacuum Logo

426 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...