...washer which in turn causes a pressure build up in the hose and it's eventual failure. The orifice size in the turbo nozzle is too small. It should be at least a 4.0 to 4.5 nozzle size. If the hose ...
...putting out correct pressure Hi there, Although your description is a bit vague, there are standard causes for low pressure that can be addressed. The first is air in the line. Turn on the hose ...
hunts on and off when trigger is not depressed, checked for leaks and screen, also discharge, still does it. There could be a small bit of grit stopping the non return valve in the inlet pipe from ...
...use a new rubber washer to make a good seal on the supply hose on both ends. if either end leaks or can **** air, just a little bit of air into the pressure washer will cause it to loose
Question about Garden
...washer with lake water for 15 minutes and now it does not hold pressure. Has pressure on first pull of trigger and then is low? I cleaned the intake of a little bit of debris, I opened up everything ...
pressure washer shuts down after about 15 sec. of Pressure washer shuts down after about 15 sec. of running time. The spark plug gets carboned up? could be running lean try setting up fuel intake a ...
...cause of this is the pressure regulating spool valve sticks in the bore. As the pressure builds with the wand closed, the spool moves against a spring to block additional water from entering. When ...
Question about Karcher Garden
...washer. I have checked and rechecked to make sure both are connected properly, and both are. So what is going on? When water is running through system, the motor has to run to keep the pressure built ...
...washer will not start at all. I can pull the cord several times over and over to no avail. I do know that it has been running rough lately and smoking a bit. Sounding raspy as well. Please help... If ...
13 questions posted
Usually answered in minutes!
126 Questions
22 Questions
3 Questions
3 Questions
44 Questions