Kirby Ultimate G Bagged Upright Vacuum "handle down" Questions

Ad

Question about Electrolux Vacuums

1 Answer

...down to the handle. How do you take the handle apart? Take a box cutter blade or something razor thin and locate the 2 screw covers on the handle. Pry the two covers off and remove the 2 hex screws. ...

Ad

Question about Electrolux Vacuums

1 Answer

I would like to replace the handle on the optima 431 dx. The handle will not release. Can you help? Press down the gray lever ,hold down and pull handle out

Ad

Question about Bissell Vacuums

1 Answer

...all the way down. Lift handle and remove container. Take to sink, turn handle, and remove lid. Fill with hot, clean water. Replace and lock the lid. Place container back into tank and put handle

Question about Bissell Vacuums

1 Answer

...handle is removed, check to make sure the valve is not stuck in the down position. If the valve is stuck in the down position, push on it manually to get it to come back up.  If it is stuck you ...

Question about Hoover Vacuums

1 Answer

...down. Replace handle and two screws. If the spray trigger is still stuck or if the rods were damaged in any way a replacement handle may be needed. If so I have included a link where you may purchase ...

Question about Kenmore Vacuums

1 Answer

...upright position there is a pedal on the left side near the wheel press down and lean the handle back.sometimes you have to lean the handle forward while presing the pedal and then lean the handle ...

Question about Hoover Vacuums

1 Answer

...handle down, then check the suction on the accessory hose, leae it disconnected. Take off the bottom container, and check the suction on the round intake tube (lower one towards the front), with the ...

Question about Hoover Vacuums

1 Answer

...down on handle to unlock it, then pull the tank out by the handle. 2. To remove the dirty water tank, slide the latches open located on the sides of the cleaner that hold the tank to the base of the ...

Question about Dyson Vacuums

1 Answer

...handle down to vacuum the motor was very loud..put the handle in the upright position it is quiet.any suggestions? when you put the handle down it turns on the brush roll. you may need to clean the ...

... there could be something stuck in there thats keeping the handle from being able to move down.... as for the self propelled part.... it probably wont work untilthe handle is lowered... hope this ...

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

JoeVacs

Level 2 Expert

445 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...