...sweeper comes back on. Is this an electrical short in the canister? Please help The wiggle test is very popular and widely used. If you can gently wiggle the area that is in question and it can cause ...
the belt over the motor shaft when using the carpet sweeper. Pay attention to the half twist in the belt when installing--there is a cast-in diagram for this in the sweeper attachment. Hope this helps
SWEEPER SMELLS LIKE SOMETHING BURNING, BUT WORKS WELL. DOES IT NEED A TUNE-UP AND CAN I DO THIS MYSELF? I would check if the drive belt has a scorch mark on it, you may have caught something that ...
...change the belt on a Windsor Sensor S12 upright sweeper? Step 1. Remove the vacuum bag housing so that you are only working with the power nozzle or the bottom portion of your Sebo, this will make it ...
sweeper. I had found one to buy, but still I knew that I would miss the Shark vacuums. Well, tonight I took the second one apart again and looked at areas where I might have missed any hair or strings
sweeper has NOT been abused. Yes, we have 2 cats & a dog but the problems I am having w/ it should not be warranted. The handle has broken. The wheel/roller on the bottom of the machine has broken off
...change the belt on my sweeper and dont have the manual.. Its also not obvious. please help! Turn the machine over so you can see the bottom. If you look carefully at the plate that covers the roller, ...
SWEEPER WITH THE EXTENSION HOSE AND NOT PULL THE MACHINE OVER, HITTING ME...AND FALL CRASHING TO THE FLOOR" This is an Engineering Statics 101 problem for you housewives. Since these Hoover "engineers
733 questions posted
Usually answered in minutes!
381 Questions
223 Questions
207 Questions
187 Questions
