Kirby Ultimate G Bagged Upright Vacuum "cant belt back" Questions

Ad

Question about Oreck Vacuums

2 Answers

cant get the roller back on after taking off and putting on a new belt! it is driving me nuts! This guide should help..... http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G

Ad

cant get the self propel belt back on my sweeper. please advise the best way to install it is to put it on the motor shaft first and then to start putting it on the large pulley at the top and roll it

Ad

Question about Riccar Vacuums

1 Answer

...belt was replaced I cant find the reset switch on this model. was working fine until the belt broke, when it was replaced, it won't turn on when plugged back in.. Reset button is on the back towards ...

trying to change bottom belt for rotater brush and cant figure out how to put back together Here is a link to the manual and the belts you need. Bissell 1694 Manual and Belts

Question about Hoover Vacuums

1 Answer

...belt to replace. cant help with manual but if i may why would u take it apart theres not much to service but to take the belt off turn the machine over and down by the roller there are a few screws ...

Question about Eureka Vacuums

1 Answer

...belt ,cant find the way how to do it. On that Eureka Canister, you're going to want to unscrew the cover on the base of the vacuum in order to gain access to the brushroll and belt. That vacuum ...

Question about Kirby Vacuums

1 Answer

...cant install belt Take the noozle off of the vac. take out the brush roll and old belt, put the belt over the brush roll and re-instal in the noozle. Turn the big square knob on the front os far as ...

Question about Vacuums

1 Answer

...belt on, but I cant get the hook to hook on the belt. On the front of the nozzle is a big knob that you turn to load the belt. Take the nozzle of of the vac, turn the knob to catch the belt, keep ...

Question about Bissell Vacuums

1 Answer

belt back on. The old one broke and i cant find my book. First take off the cover on the left side of the top cover, then turn it over, remove the screw holding the red lock and pull the cap and brush

Question about Fantom Vacums Vacuums

1 Answer

...cant find any info online thanks for your time tina Greetings from GoVacuum.com, Have you replaced the belt with a new one yet? You may want to try replacing the belt, as with flat belts like the ...

Not finding what you are looking for?
Kirby Ultimate G Bagged Upright Vacuum Logo

733 questions posted

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...