Kirby Ultimate G Bagged Upright Vacuum "belt engaging" Questions

...belt is not engaging --set to carpet --belt not broken belt worn or stretched Is there a button to turn on brush roller ? Is the handle in the down position? Is the motor turned on? Can the brush ...

...in the roller. Removed strap but roller made noise when engaged, now roller not engaging but rolls free when turned manualy. It could be the belt. Here is the replacement belt you need: Dyson DC17 ...

install & engage belt on Ultimate model can't get belt to engage or beater brush to rotate or touch the carpet-using carpet cleaner. The Ultimate-model #293001 Here is a link to my online guide for ...

beater bar belt too loose My beater bar v-belt doesn't seem to get tight enough when engaged. The beater bar slows or stops when it contacts the carpet, and as a result the flat drive belt spins ...

...is not moving and so no suction. When I turn the front part so the green arrow is aligned with "Belt On" and then look at the bottom where the roller is, it doesn't look like the belt is engaged. ...

...engaging the belt after it was put back on. I took it off to clean brushes and did everything according to the video but the belt will still not engage and green light does not come on. The belt is ...

...It will not pickup anthing on the floor check the brushroll if it spins freely, replace the belts 38528-034 and 38528-035. and make sure the tensioner for the V belt engages when you release ...

...engaging, missing belt in addition to brush belt? your belts need to be replaced on average every 6 months. you can find these at a vac shop or you can order them online from the company. agitator ...

beater bar motor will not engage Replaced drive belt for beater bar, but now beater bar motor will not engage/turn on. Check your clutch to make sure it's engaged. There should be a knob on the foot ...

Brushbar not working probablt belt wore out or broken r&r Make sure the knob on the side of the main floor nozzle is engaged. This is a common problem. Check the brushroll belt for tension. Put ...