...detergent, then remove injector and rinse with high pressure. Not good for the pump but to apply soap reliably under high pressure the soap needs to be injected through the intake of the pump. enjoy ...
...will not build up pressure and water will squirt out the detergent hose. The spring and ball bearing act as a check valve to allow the detergent in but if they are missing then water will squirt
...detergent when trying to clean I posted an answer to no soap on the Karcher Factory-Reconditioned 2,600 PSI 2.3 GPM Gas Pressure Washer G 2600 VHR. Same machine I suppose, but use the black 65 l ...
...DETERGENT HOSE USES THE VACUME FROM THE WATER MOVING THRU THE PUMP TO DRAW THE SOAP INTO THE PUMP. CHECK THE AREA WHERE THE HOSE CONNECTS TO THE PUMP THERE SHOULD BE A SMALL BALL CHECK THAT MAY BE ...
Question about Karcher Garden
...check the Detergent Injector, water should never come out there, Maybe something (dirt) is causing it to malfunction. see picture here http://www.ereplacementparts.com/spare-parts-kit-p-482334.html. ...
...check ball inside the injector is stuck. The injector is the little device that is just before the outlet where the pressure hose hooks up. These always have a small metal ball, held in ...
detergent First you need to see if you have to utilize a soap nozzle normally black in color and with a large orifice that should create low pressure and or a selective change over nozzle with a spray
9 questions posted
Usually answered in minutes!
71 Questions
100 Questions
15 Questions
12 Questions