Karcher PSI Electric Pressure Washer "producing" Questions

I have 5.5hp briggs&stratton pressure washer Simoniz S2350. Would you know the PSI for this item? Every 5.5 HP pressure washer runs between 2,200 and 2,500 PSI with most set by the manufacturer at

piston. When the stop piston moves it presses against an electrical switch tjat breaks the circuit. Producing 20% more pressure requires that your machine has no water leaks in the pump, hose, trigger

My robin subaru r1100 can I run it at 240 as it has a UK plug on it I tried to run a kettle but it started to cut out thanks You need to determine output frequency. Is your engine running at 3000 rpm

...RE125K power washer. How to get a focused jet? Is the nozzle adjustable? The spray is now only producing a wide angled fine mist and won't produce a focused jet which I can use to clean a brick ...

pressure washer won`t pressure up engine runs good pump does not produce pressure Have you tried adding 30 wheight pump oil,under 1 qrt usually

how to repair chemical pickup pump will not pickup chemical for cleaning Make sure that you have adjusted the nozzle on the end of the washer so that it produces low pressure as this is the only way ...

burned through the hose, repairs? hose has sprung a leak With the high pressure that these units produce, I would recommend replacing the hose instead of repair just for a simple matter of safety.

Very little water pressure Is produced so it renders the machine practically inoperable I don't know your machine but is is gasoline powered and was it in storage a while?

Starts and runs. Shut off. Won't restart for one hour. What's wrong? Gas pumped today contains as much as 10 percent domestically produced ethanol. Gummed-up fuel systems 90 % chances the carburetor ...

Pressure washer has no pressure at all No Pressure at all check for blocked jet at the end of the wand this is the same as letting the trigger go and the pressure relief regulator is not engaging the ...