Question about Garden
...power washer nothing coming out of wand all water coming out trigger. Either the pressure tip or wand are blocked or the valve in the trigger is broken. Remove the high pressure tip and either ...
karcher pressure washer trigger problem karcher pressure washer will work properly with some wands on but pump will not turn on with others The wands that it will not run with would most likley have a
...Power SW Off until the oil purges. Then switch the unit on and rapidly trip the trigger at 0.5 sec intervals or less. If it trips off wait 5 mins and try it again. Do the rapidly tripping the trigger ...
Question about Campbell Hausfeld Garden
...power on, I disconnected the water coupler and the pump came on. I coupled hose up and pump immediately stopped again. Can anyone help please???? ...
...power washer running for a few minutes, then I go to pull the trigger on the wand and I only get about 1-2 seconds of full force pressure. The machine is still running (not as loudly) but no pressure ...
Question about Craftsman Garden
How do I solve my problem with my pressure washer not sending soap? I have cleaned the line and siphoning part. I get water with out soap! Pressure washers usually will not draw soap on high pressure ...
Question about Craftsman Garden
...start my power washer. the pull start is locked and wont release to start engine. When the pull start gets locked, you have to release water pressure from the wand. I had the same problem last
pressure washer stalls and dies motor runs fine. turn water on without depressing wand and motor stalls and dies. as long as wand is pressed it runs. the pressure release valve is sticking Pressure ...
...power on push down trigger no water then motor stops go's completely dead the problem was in the gun, the nipple had broken off the plastic gromit,in the brass part of the trigger mechanism, stopping ...
find problem. I bought a briggs and stratton power washer and the pull cord is stuck how can I fix this? Press on the trigger on the wand to release pressure . then pull on the cord and it should work
166 questions posted
Usually answered in minutes!
685 Questions
273 Questions
72 Questions
36 Questions
34 Questions