...and I'm wondering how to tackle this. hi the rounded end indeed pulls off use 2 screw drivers at 180 deg and lever off hope this helps merlin ...
...aware that you may also need a torque wrench that goes up somewhere in the neighborhood of 180 ft-lbs. The only left hand thread I can think of is a 24mm flange nut on the end of the ...
...on the other linkage. Also, the lever on the governor is attacned to another that could be flopped 180 degrees. So where can I get a picture that shows the 2 holes of throttle, 2 wire links one with ...
Question about Garden
...seized up or the brushes in the motor have worn. Try removing the brushes if you can and turn them 180 degrees and replacing them that way. Best of
Question about Garden
I just got a Toro 180 Power Cleaner, 4 cycl from my brother who only used it 3-4 times. It will not start. Could it need a spark plug? If so, where is the spark plug on this model? Could it be the gas
Question about Briggs & Stratton Garden
...its started. Sfter its been on for a while it doesnt lose pressure. If by "a few minutes" you mean 180 seconds, I really don't know what to say. But if you mean 5-10 seconds, you probably are ...
166 questions posted
Usually answered in minutes!
685 Questions
273 Questions
72 Questions
36 Questions
34 Questions