chainsaw wont stay running wont stay running if it starts (maybe idles) but then dies when giving it gas it sure looks like its a carb problem , most likely dirt in the high speed jet , but could be a
chainsaw wont stay running wont stay running and hard to start The plastic sleeves are anti tamper devices, if you screw a small self taping screw into the centre of it, it will strike the screw under
Question about Garden
timing chain broke installed new one starts but wont stay running at idle speed You've asked this question in the 'chainsaws category' Chainsaws don't have timing chains.!
...chainsaw it starts but wont stay running I cant find the fuel filter is it in the tank like other chainsaws all chain saw fuel filters are in the tank. find something to fish it out so you can grab ...
wont stay running my chain saw will start but it won't stay on by its self i have to keep pushing on the gas inorder for it to stay on Try pumping the primer till it's full of fuel, then start the saw
...the chainsaw wont stay running. check the diaphram in the carb it souds like its gettin fuel but not enough also make sure the airfilter is clean,it may not be gettin enough air and cause it to ...
...chainsaw wont stay running while idling. its a brand new saw. don't know if it needed to be adjusted or if its pre adjusted already. Starts and runs fine but just won't stay on when in use. If it ...
pro 38cc 90days old starts fine but wont stay runing Try adjusting idle screw big one w/ spring on it.Clockwise 1/2 turn
my chainsaw starts right up but wont stay running. clean carb and filter, get new gas
chainsaw cuts out saw starts but bogs down when i throtle up and shuts down,got spark,see fuel inject when primed, wont stay running Clean the air filter. Drain the tank and refill with fresh fuel mix
286 questions posted
Usually answered in minutes!
583 Questions
457 Questions
170 Questions
