Poulan Pro 42CC 2 Cycle Chainsaw, 18" "replace choke husqvarna" Questions

...mixture Run it with the choke on, if you see air bubbles int he fuel line going to the carb replace ALL of the lines, if not the crank seals may be worn out or the crankcase seal may be

Where can I get a manual that shows how to take carb off? trying to replace choke shaft Find Husqvarna Parts Now to download the drawing and parts list

...choke was in. just fuled it. Saw is brand new first time using it. not first time using chainsaw. I have a Husqvarna weed eater. It runs fine. Take the saw back for warranty service. We have a Husky ...

...Husqvarna 350 (1998). Just replaced cylinder and dismantled the saw for a complete wipe down. After reassembly, the saw runs great if I start with a squeezed throttle. Will not idle at all. Help! ...

...husqvarna will crank if its on choke but will not idal and will only run on choke but for a few seconds how can I fix it Fuel starvation, start by replacing the fuel filter in the fuel tank ( on the ...

...Husqvarna 50cc "Rancher" it has served me well for about 23 years with very little trouble. Lately it has taken to running fine for up to 10 mins and then cutting out and refusing to restart until ...

...husqvarna 372 chainsaw will not run Saw will start with Choke. Will not idle or run at low RPM can barely keep running at medium to high speed, changed impulse line, adjusted and rebuilt carb, new ...

choke to start. Revs up one time then dies and I have to start the process over again. Wont run at all. Any suggestions? Fuel starvation, replace the fuel filter in the tank, check the fuel hose up to

how 2 attach the choke knob 2 he carburater attach choke knob 2 carb replaced gaskets on carb cant remember how choke fits back on carb http://www.mediafire.com/view/7jkzri5m6fyk4fi

choke richens fuel mix) id start with the simple things and move to the more difficult ones (1) fuel tank - valve on , fuel in tank, hose not broke or crimped (2) fuel filter replace or clean out fuel