Poulan Pro 42CC 2 Cycle Chainsaw, 18" "gear" Questions

Ad

internal gear slipping ,seems like rart of gear internal gear slipping ,seems like part of gear teeth have stripped you may be able to fix your problem by tightening up the chain a bit more. other ...

Ad

not getting oil to blade tried the screw to adjust but still no oil getting throu !! Your worm gear assembly is probably frozen in with sawdust and dirt. Take off the oil gear assembly. You will need ...

Ad

...the casing off the back of the adjusting wheel and discovered that the plastic...... yes, plastic gear that meets the metal gear was stripped. Why would their be metal gears in the adjusting wheel ...

I have a 107624-02 saw. Motor of saw runs but chain does not move. Trouble shooting diagnosis: Gear train failure. I removed the assembly of the chain bar gear. The "spring steel" strap that

I recently replaced the worm gear from my backup saw which is an older 372 xp and upon taking out the old one noticed that it was fit with a metal inner piece and that the one I bought at the shop had

Question about Garden

1 Answer

...a rope kit on model 358791050 weed wacker The head should screw onto the output shaft of the gear box. To prevent the gear box from turning there is a notch right where the base of the head ...

Question about Garden

1 Answer

...the same There were two pumps over the life of the 181/281, the difference is the oil pump drive gear opening in the pump body, if you have the old oil pump, you can fit the later one, but you

Question about Husqvarna Garden

1 Answer

...the matter? Best regards, Michael it seems to me the you have either a clutch problem or a spur gear problem.if it is the clutch the clutch drum will be blue.witch means you need to replace the ...

in the wheel gear adjuster for chain does not thighen chain when turning wheel like little gears are not matching up, what would be wrong? The three hundred series saws have side adjust consisting of ...

Question about Husqvarna Garden

1 Answer

chain oiler 357xp oiler on 357XP not working had gear replaced last season? when you say that you changed the gear,was that the plastic one?check the other gear that is on the pump itself.make sure ...

Not finding what you are looking for?
Poulan Pro 42CC 2 Cycle Chainsaw, 18" Logo

708 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...