Poulan Pro 42CC 2 Cycle Chainsaw, 18" "chainbrake problems" Questions

...Is there a safety feature causing this, or what is the problem? All machines today will have a chainbrake, this is normally a band that comes around the clutch drum to stop the chain in the

...any ideas? Hi, hold the cover in a vice where the bar nuts normally tighten up to, then pull the chainbrake lever back in the direction the handle bar would be. You will feel a click and the lever ...

...as intended. With a gloved hand can you manually pull the chain around the bar? if not the chainbrake is still engaged, pull the hand guard fully back to the top handle until you hear the ...

ryobi pcn3335 chainsaw chainbrake will not release fully chain becomes fully free only when brake handle is pulled hard back to release and is held. 1. Is there a Homelite/Ryobi dealer/authorized ...

problems this one is having. Not had a lot to do with Echo, but have always heard good reports, for smoke to come from the clutch cover the clutch would have to be slipping, either due to running with

...solution your Attorney General, BBB. HTH Lou Homelite won't eat the repair on one you removed with chainbrake engaged. I wouldn't

...Poulan chainsaw. It's the kind Wal Mart sells. It's worked great for about five years. Today, the chainbrake stopped working. When I crank the saw, the chain runs. It was for no apparent reason. Is ...

...start by removing the guide bar and chain again, this is secured by the two 13mm nuts holding the chainbrake side cover on ( make sure the brake is off before removing the cover ) yoy now need to ...

18" husqvarna chainsaw how do you replace drive plate after chain replacement It sounds like your chainbrake was on when you took off side cover .To get brake off place cover against saw with bar off ...

...the chain stopped moving with the engine still running. Sounds silly but have to activated the chainbrake by accident.? The black handguard by the top handle is the chainbrake.! Pull it back to ...