Poulan Pro 42CC 2 Cycle Chainsaw, 18" "42 cc fuel" Questions

...42 cc saw, mixed up new gas new 18" Poulan Pro 42 cc saw, mixed up new gas used stabil and hightest gas the thing runs poorly, bogs down when you put it in a log of any size, No power Don't use ...

chainsaw runs then dies Starts up with choke out but then it dies. Then it floods it self Carburetor needs to be overhauled and replace all fuel lines and fuel filter.

...42 cc poulan chainsaw will run and cut good for about 10 minutes then will start slowing down and quit I have replaced all fuel lines and new Carburetor as well Pull and check the cylinder and piston ...

Whats the oil to gas mixture ratio for a Homelite 42 cc chainsaw? Use 2.6 ounces of oil per gallon of gas to give you a 50 to 1 ratio of fuel to oil. eight parts gas and one part oil

...in carb. & also tried in cylinder, it does not try to start.Is it possible that spark is not strong enough or does this sound like a fuel issue. I have a 42 cc 14"bar will not start. poulan chain

...42 cc chainsaw. wat could it be ? Try pouring a small amount of fuel mix into the spark lug hole and try for start. If it pops several times, then check the fuel filter, air filter, and muffler for ...

...42 cc chainsaw, it will fire up, but once I touch the trigger it dies on me. Any solutions? Its running too lean, there is either a blockage in the fuel tank filter, or in the carb itself, you must ...

42 cc, pro gas filler cap? why would the filler cap not screw on, do these warp or get out of round over a period of time. appears to be ok, but won't thread back on once you remove to fill with fuel?

...42 cc chain saw model # 358-3650802. this saw seems to start and run ok when cold. after running hard for apx 20 minutes or so and shutting down for refueling/oil and let saw cool down for 10-15 ...

...42 cc chain saw that is hard to pull the rope like the compression release is not working. How do I repair it?? Built in 2007 I do not think they had a compression realese on a saw that small, it is ...