engine starts, then stalls troubleshooting in the user manual says adjust the L and H jets on the carb. But.....I need to take it to a service facility. I don't want to! Do you know the settings for ...
18 INCH TIMBERLINE Make sure you have fresh fuel mix in the tank. Pump the primer bulb about 6 times or less until the bulb draws fuel into it. This fills the carburetor with fuel. Close the choke and
...18 inch bar echo chainsaw wont work its got compression and ignition but no gas already checked the filter and cleand out the gas tank...stuck Does the primer bulb fill with fuel when pumped several ...
...18 My chain and bar does not get oil any more. I did some troubleshooting and found out that the little turbine inside the clutch or driving gear does not create any pressure to push out oil out of ...
troubleshooting chainsaw With a new chain,the cut is wide and untidy and the saw seems to pull into the log Take a close look at the groove in the bar where the chain runs and the track on which the ...
708 questions posted
Usually answered in minutes!
457 Questions
255 Questions
170 Questions
