Husqvarna Forest & Garden #952802239 235E 16" Gas Chain Saw "chainsaw idles rev" Questions

engine dies upon acceleration after starting and idling would like to know the procedure for adjusting the low idle speed and the high operating speed turn the high speed and low speed mixture screws ...

chainsaw, I rebuilt the carb with all new everything. Now it will start with choke all the way out. Idles really high. If I push choke in, it dies instantly. The hi-lo and Idle is off I know for sure.

What are the air and gas settings for a poulan micro XXV chain saw The saw starts but dies out under cut and it will not stay running while idling adjust the L screw in fully till right in,then out ...

...chainsaw idle to high how do I fix the idle,I see the low and high screws First there is an throttle idle screw that adjust the amount of throttle at idle try turning it ccw until it idles down. If ...

...SIX MONTHS OLD WHERE DO I FIND A TOOL TO ADJUST THE IDLE AND HI SPEED MIXTURES Maybe this will help. My poulan starts, idles, but when I rev the engine at full throttle the engine shuts down.

esco chainsaw model 162 hi i have a esco model 162 chainsaw i wonder would you be able to help me; What way do you turn the screws on the carburetor The adjuster screws on a chainsaw carb are fuel ...

...saw Try screwing the "H"screw in then out one and 1/4 turns then rev the saw up and adjust till in really start,s to rev cleanly the "L" is for low revs at idle adjust till it idles at required

...idles without the chain moving on the bar, now screw the H screw in to get full revs, be aware this should be set with an engine rev counter, do not exceed the manufacturersmax revs, hobby saws ...

why does my poulan 2075 runs with choke on but not when i push the choke in? Crank seals could be leaking air in,or carb settings incorrect.screw both mixture screws right in,then out 1.5 turns..set ...

...rev up or idle stihl chainsaw 390 will not rev properly or idle properly. l need to know how to set the carberator First thing, try new gas. If that doesn't do it, you need to adjust the low and high ...