Husqvarna 450 e-series 18" Chain Saw "runs without pulling" Questions

Ad

Question about Stihl Garden

1 Answer

...without pulling the throttle, poll the rope handle until the engine fires and runs for 4-5 seconds then fully open the choke to the run position, let it warm up for 25-30 seconds (don't forget to let ...

Ad

Question about McCulloch Garden

2 Answers

...Without starting fluid sprayed onto the air filter, saw won't even pop or burp when pulling starter. Once started, it will run ok until I 'bear down' into the wood, then it ...

Ad

Question about Garden

1 Answer

...pulling it then, if still wont go , it looks like it may have been run without enough oil mixture , an will need to be rebuilt (if worth it ??) if saw does pull over easier but the chain moves too , ...

Question about Husqvarna Garden

2 Answers

can't start a new Husq 235 chainsaw. I put new gas/oil in about a month ago and it ran great. Tried to start it today and it acts like the ignition is not ''on''. I primed it, choked it, tried holding

...without the oil in the fuel mixture. It is possible it is dry and some galling is happening. Or - if this saw is equipped with a compression bleeder (for easier starting), this could be not ...

Question about Garden

1 Answer

...runs great There is no reverse on a chain saw. That being said, it is possible that your chain brake is engaged, it is the (usually) plastic handle in front of your leading hand on the saw. Pull it ...

Question about Makita Garden

1 Answer

...runs, or go to full choke again for maybe 3 cranks. Keep alternating sets of pulls with/without full choke until you get a pop, or give up. All the above is for the general case- shouldn't take many ...

Question about Garden

1 Answer

...without oil in the fuel which will result in the piston /ring(s) scoring itself and the cylinder wall severely. Remove the muffler and watch the piston as it travels the cylinder while pulling the ...

homelite chainsaw runs rough and clunking sound How is the compression? Pull the start cord without trying to start and you will be able to feel the compression.

...runs good, but takes many pulls to start. Acts like it is not getting spark. Have replaced spark plug, and have left it out and would pull start rope, but, see no spark. Magneto is clean and adjusted ...

Not finding what you are looking for?
Husqvarna 450 e-series 18" Chain Saw Logo

139 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...