Homelite ZR10926 16" Chain Saw "older chainsaw oil gas" Questions

...older Craftsman chainsaw? What is the oil & gas ratio for an older Craftsman 3.4/18 chainsaw, Model# S091337? The year of manufacture is unknown. Unless the saw is over 40 years old, 40:1 ratio ...

chainsaw manuals recommend using 90+ octane unleaded gasoline mixed with Stihl two-stroke engine oil at a 50:1. Since this is an older saw that runs at a lower RPM than modern saws, you probably don't

chainsaw. Other than the 'M U C' engravings, theonly detectable writing I can find on the saw is one number printed under the filter top/cap. thanks for any help you might be able to give. :-) It will

...gasoline to my 40cc homelite chainsaw work properly ? Most saws and other 2 cycle engines use 40:1 ratio gas:oil. I would not expect yours to be different, unless it is an older saw made before

...chainsaw that idles ok but bogs down when giving it gas ..it has good fuel make sure your using high octane (no ethunal) and fresh oil mix no older than 6 mouth (oil mix) if it st-ell happens try to ...

...chainsaw - CS-3900, but not the manual. My question is simple - how do I know if I should use a 50:1 or 32:1 oil to gas mixture? Oil to gas mixture is more a function of the oil than the saw. If you ...

What is the gas/oil mixture for a Homelite z3300 chainsaw Most all chainsaws older and newer pretty much run on 50:1 ratio.

...older model saw and should be running about a 16:1 ratio. 8oz. of oil to 1 gallon of fuel. Hope this helps. Note: You're always better being a bit richer (lower ratio) than you are leaner (higher ...

...chainsaw, most modern saws use a fifty to one mix. Older ones typically used a 25 to one mix, and very old ones used a 16 to 1 mix. A thirty to one mix will work just fine, since you do not have a ...

...oil to gas ratio 33 cc 16 in chain Most newer chainsaws and small 2 stroke gas gardening tools use a 50:1 older chain saws use 40:1. If you don't know just use 40:1 your saw will only smoke a bite. ...