Homelite ZR10926 16" Chain Saw "chainsaw turns idling" Questions

chainsaw is idling the chain keeps turning if this is happening, then your chainsaw is just idling to fast, you need to turn down the idle speed a little. on the carby, there are 3 screws, 2 small (H)

Reference the Husqvarna 350 chainsaw. Why does the chain continue to turn at idle? I just installed a new clutch. Adjusting the idle down causes the saw to shut off upon trying to accelerate. Sounds ...

my 435 starts perfect but will not idle whats the problem carb settings are out of wack. try turning your idle screw up 1/8 of a turn at a time until it idles at a reasonable rpm and the chain not ...

echo sc 4400 Chainsaw blade turns constantly If lowering idle speed does not stop chain broken clutch springs will cause chain to not stop turn down your idle

...screw somewhere on the saw (look in your manual). Adjusting this setting lower will prevent the chainsaw chain from turning in the idle throttle position. Basically you want to set it so the

chainsaw blade turns constantly, even when idling. If the chain turns on the bar when the saw is at idle, then the idling speed is still too fast. If you turn the idle screw down until the chain stops

stalls during idle my mcculloch chainsaw stalls when throttle is in idle Try setting the idle speed screw CW a little (not the two jet screws) until the engine will continue to idle, but not turn the ...

runs, but will not idle. Turn the idle speed screw (not the idle jet screw--L) CW 1/4 to 1/2 turn so that the engine continues to run, but the chain doesn't turn. Make sure the air cleaner is not ...

Makita DCS6401 wont idle. When the gas is released the chainsaw shuts off. Try turning the idle speed screw CW (not the jet screw marked L) one full turn to increase speed. Normally, this is set so ...