Question about Poulan Garden
...spark but won39;t pop. Chainsaw won't start. Replaced carburetor, fuel lines, fuel filter, ignition module, spark plug. Using new gas and oil. Has good spark but won't pop. try ...
...gas. I cleaned carburator, soaked it. Changed spark plug any suggestions? The diaphragm in the carb is likely ruined from the gas gelling onto it. This will put pinholes in it and then it won39;t ...
Question about Poulan Garden
...spark getting gas ,don39;t know. won't start can't even get it to fire got spark getting gas ,don't know. Check the compression! It has to be around 120 and no less then 100 ...
Have a 455 husqvarna new gas new plug still won39;t start do you have spark
...well, stopped saw filled oil, gas, and sharpened chain. won39;t start. changed the spark plug, fuel filter, and air filter Did u put fuel in oil tank and oil in fuel tank. Happens to the
...won39;t start. These machines have had issues with main bearing cages breaking up, this it turn scores the piston and snags the ring in, if there is a good spark and the plug is getting wet i woud ...
Question about McCulloch Garden
...Chainsaw acts like it's starving for fuel. I have checked the spark plugs and fuel filter. Filter seems to look ok. What else could it be? take off the muffler and try it there is a screen ...
...gas in wont start,pulled spark plug and put a little gas in ,it fired but wont stay running,the primmer bulb seems to be not working Hate to tell you this but if you didn39;t mix oil with the gas ...
...spark 14" Mac Cat gas engine won39;t start. Changed spark plug, cleaned air filter, cleaned spark arrester. At my wits end. Check tank fuel filter. safe way, put hose on end of filter blow ...
...chainsaw that has been stored for 5 yrs & I can't get it started. Oil & gas was dumped out before storage. I started with the gas hose & primer hose as they were rotten. After ...
77 questions posted
Usually answered in minutes!
778 Questions
175 Questions
129 Questions
92 Questions
77 Questions