Husqvarna , No.455 Rancher, 20" Gas - Powered Chainsaw "chainsaw turn run shut" Questions

...chainsaw starts and runs but the chain won't turn so it shuts itself off. What am I doing wrong? Husqvarna 240 Check the braking bar. You usually start the chainsaw with the brake in the 'on' as a ...

...chainsaw shuts off. Try turning the idle speed screw CW (not the jet screw marked L) one full turn to increase speed. Normally, this is set so that the chain stops moving, but the engine continues to ...

...Chainsaw - starts but won't run - GardenWeb forums2.gardenweb.com > Garden Forums > Tool Shed Aug 9, 2006 - Re-chocking (once until it kicks) gets it running again for another 20-30 seconds ... carb ...

What is the initial carb setting for this saw? I would start by closing them all the way shut then open 1 1/2 turns .See how your saw runs then adjust by about 1/8 rotation. If you go two turns one ...

...chainsaw when it starts up the chain starts turning without throtling and run at high speed till the saw shuts down. does not mater what ideal speed is set at? it takes off like throtle is stuck but ...

my stihl sh 55 blower starts then shuts off If it is getting smokey exhaust befor stopping it is getting too much fuel. If not smokey it is not getting enough fuel. If smokey first take out the air ...

Chainsaw will crank, but will not keep running. Carb has been cleaned and rebuilt. Can you give me some advise? Hi, Over time sometimes the adjust ment screws on the carb vibrate and change the fuel ...

I have a MAC120 and not keep it running. Starts but shuts off right away. Checked the carb. and everything seams OK. Use high test gas. hi i have a mac120 but when running its using too much chain oil

...Turn the screw counterclockwise 1 x 1/2 turns. Call your local chainsaw repair shop to have them repair the chainsaw if the chain continues to run after completing Step 2. Choppy Idling and ...

chainsaw shut off as soon as i let go of throttle.changed sparkpug and got new fuel/mixture.still wont try to start Hi try this ,with a small screwdriver screw the H and L screws in until they stop, ...