Husqvarna , No.455 Rancher, 20" Gas - Powered Chainsaw "chainsaw crank engaging" Questions

Ad

chainsaw, ie Husqvarna/Stihl/Jonsered etc, all of these oils should be run at 50-1, avoid oil makes you have never heard of. Starting instructions are as follows, switch the red ignition switch too on

Ad

46cc cranks but wont keep running if trigger is released after cranking you must keep trigger fully engaged or saw will shut off. Has a hard time reving up to top speed at first. The small ports and ...

Ad

Question about Poulan Garden

1 Answer

...chainsaw pp3516avx, it won't start, choke lever will not stay extended. I followed the instructions to start and nothing works The choke system is connected to the half throttle position, if you lift ...

How do L fix the cranking on my Homelite 54 it will not engage to start the saw ???? Remove the cover and inspect the little grab dog and see if it is broken or the spring is let go.

Poulan chain saw. After starting, chain drive won't move My chain saw will crank just fine. When I give it some gas, the chain will not move. After I take the cover off and take the arm off, I try to ...

Question about Garden

1 Answer

...either the clutch spring has become weak and the shoes are engaging prematurley, or the drum bearing has collapsed, or just needs greasing, if the drum drags on the crank the chain will turn at

Pull cord works; but does not engage the crank How do I get the assemly removed to check connection of the pully to the crank? when you pull the cord the motion pulls out 2 pins that ingage the clutch

Question about Garden

1 Answer

my riding mower can not start lost my manual pls help!!! If the engine will not crank, first make sure the battary is charged, if ok, sit on the seat, make sure the deck is not engaged, make sure it ...

won't idle and when trigger is fully engaged it bogs out? won't idle and when trigger is fully engaged it bogs out? This could be several things..fuel filter in tank clogged, hole in fuel ...

...chainsaw Start by filling the fuel tank with a fresh mix of 50-1, fill the chain oil tank with non fling chain oil, sit the saw on the ground with the bar away from any obstructions, engage the ...

Not finding what you are looking for?
Husqvarna , No.455 Rancher, 20" Gas - Powered Chainsaw Logo

520 questions posted

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...