...and run but chain wont turn Chain brake may still be applied. The chain brake is the front hand guard, pull it towards you to release the safety brake. Check chain tension, the chain may be too
motor runs chain wont turn Is the chain brake still engaged.? pull bach the front hand guard to release the chain brake. Is the chain too tight on the bar.?
Question about Husqvarna Garden
chain,and brake cover(tightened)the chain wont turn. all parts installed are new(bar,chain,brake cover,clutch,clutch bell,washer,clutch bell bearing,and worm gear.What do you think? take it to a Husky
Question about Husqvarna Garden
...chain,and brake cover(tightened)the chain wont turn. all parts installed are new(bar,chain,brake cover,clutch,clutch bell,washer,clutch bell bearing,and worm gear). What do you think? take it to a ...
Question about Husqvarna Garden
...chain,and brake cover(tightened)the chain wont turn. all parts installed are new(bar,chain,brake cover,clutch,clutch bell,washer,clutch bell bearing,and worm gear). What do you think? Tighten the ...
...chain brake wont open cant get chain brake to unlock This thread covers it quite well. It is applicable to all models. http://www.fixya.com/support/t1195376-chainsaw_brake_locked_husqvarna_455 HTH ...
...chain brake must be engaged on the cover Same thing happened to my 450. Push cover on as much as possible, most importantly so the chain brake on the main unit engages the "chain break coil" on the ...
brake wont engage tack off chain cover check that the brake band is not broken
my chainsaw starts and runs, but the blade wont turn. Sounds like the chain brake is on, grag the hand guard and pull it firmly right back to the top handle until the brake clicks off, now try again.
earthquake chainsaw cs4518 wont start Sounds like the Chain Brake? You will need to replace this or disengage the brake. Take the cover off and see if you can start it.
520 questions posted
Usually answered in minutes!
529 Questions
514 Questions
353 Questions
122 Questions
131 Questions