Husqvarna , No.455 Rancher, 20" Gas - Powered Chainsaw "51 chainsaw start" Questions

the Husqvarna chain saw models 51 and 55 does not starts. Is this about two different chainsaws? You will need two different posts giving the particulars about each saw.

51 chainsaw. Can I hone out the cylinder and still use it? Cylinder is scored in the chainsaw, was wondering if i could get help on how to take it apart, or if I can even just hone out the cylinder to

...51 idle seems to struggle, runs OK when I throttle then chokes and dies out as soon as the throttle is released. What can I do? will it start right back up after it dies? you could use a small ...

Starts but stalls when hot. Chain is not too tight New fuel filter and plug is fine. Seems not to be getting enough fuel Larry,Carburetor may be dirty, remove and clean or rebuild. Check the attached ...

Husqvarna 55 rancher wont start, good compression, good spark, flywheel key ok cleaned carburetor, cleaned air filter, put gas in spark plug hole wont start. stopped wont start Check flywheel key ...

carberator adjusting hard to start and just installed new carberator Many new units have a very limited adjustment possibility. This is due to EPA regulations. If the saw is hard to start, it may need

...a Husqvarna 51. It will start but not stay running. If staying after acceleration, is some air leak from cranshaft sealing. if just staying than check air leks from between cilinder and

husqvarna problems new plug, new fuel, no start??? If you machine was not running for some time, the carburetor membrane must be replaced, even if all looks fine. Get a kit and replace all.

...51 will not start Changed gas filter in tank,replace the coil and plug. It just doesn't try to start when I pull the rope. Two things to check, ren=move the flywheel and check the key has not ...

husky 51 starts and idles fine but the chain stops as soon as it hits cutting surface older model 51 Sounds like ur cluch has worn out.