Sears Craftsman 7-1/4 in. Circular Saw with LaserTrac and 5 Bonus Blades "work" Questions

My Electric saw works intermittently my saw works fine then stops working. I checked power outlet and fuses and they are working fine, what can be the problem? Could be it's overheating. Clean out all

My dewalt 718 chopsaw won't work, i recently replaced the trigger switch, is there anything else on these saws that 'goes' under normal operating procedure The brushes. Some saws have a reset or fuse.

saw just cut out light works but saw wont The problem could be with the brushes or the power switch. The light will still work if either of these things are not working properly. The brushes should be

miter saw seized Was using a craftsman miter saw 10", and the degree changing lever is seized. It was working fine, then I couldn't change it anymore.Is this a common problem, or is the chop saw ...

What is the freeze/thaw method? Sometimes you can get a nicad battery that is not charging well to work a little better if you put it in the freezer. I have done some testing on this and It does work

my makita 5903rk curcular saw has just stopped working, checked brushes and everything looks ok It worked the last time I got it out of the box about 2 months ago then I tried it yesterday and it just

12 inch compound miter saw wont turn on anymore, was working earlier. Could be the trigger switch or the power cord connection. For the switch pop the housing and disconnect the switch and hot wire ...

i PLUG IN MY CIRULAR SAW AND IT DOSE NOT WORK i PLUG IN MY CIRULAR SAW AND IT DOSE NOT WORK probably the plug, or the switch or the cord where it enters the tool

cut the cord and replaced it but saw still doesn't work maybe the positive and neg. wire's are turned around....switch them around and see if that works.

The trigger switch on my Makita 5600NB circular saw no longer works and i can't locate a replacement The trigger switch on my Makita 5600NB circular saw no longer works and i can't locate ...