Sears Craftsman 7-1/4 in. Circular Saw with LaserTrac and 5 Bonus Blades "table blade down" Questions

...blade away from the teeth and adjust the fence so that it is just snub then lock down the table and move the square to the back of saw, it should move with no resistance. If it does then the fence is ...

...of a saw table (with a hole for the blade) so that I guide the wood that I want to cut, while the saw remains fixed. Rewire the saw with a table mounted switch. This will probably void the

table. Put a small scrap of 2x4 against the blade and adjust until the depth of the blade matches the thickness of the 2x4. Lock it in place, Then bend or adjust the depth scale so that it reads 1-1/2

...down https://service.toolcommerce.com/PDMSDocuments/EU/Docs//docpdf/dw733_eur.pdf Remove power cord. Lock blade in position using the lever on the right, Unbolt 6 central bolts using tool provided, ...

the washers, etc carefully and replace them the same way they came off. If there is no locking button, you can use a scrap piece of wood on the saw table and push down on the blade to lock it in place

...blade and the table. You ought to be able to exert enough pressure to hold the blade from turning while you loosen the nut. (You''ll have to have the wood in the right position either fore/aft of the ...

...blade nut is on the left side (when facing the saw). The lock won't hold and I am not sure which way to turn the nut to loosen it. I've tried both ways and used WD-40, but I still can't get it off. ...

...blade and the saw table (might have to lower the cutting head and hold it down. Next try again with the hex key... Make sure it is the right size one, i.e. the one that came with the saw. If the hole ...

...blade on my Delta 36-540 table saw is jammed in the 'down' position. The turn wheel will not move it. Thanks Walt Is there a 'wheel lock' on the shaft? You may have to dismantle the saw arbor ...