...circular saw with laser light. Can you simply tell me how to tighten the blade? Thanks Jean usually there is a spindle lock around the gearcase area that you need to depress UNPLUG SAW FIRST and then ...
...side of the blade. If you want to align the laser to the left side you must move the "washer" to the left side of the blade. However, make certain that, in doing so, you do not prevent the blade from ...
...blade cuts into the guide rail ... Hi Berlitz The TS75 when new will cut a small amount off the splinterguard (Plastic/rubber edging). If the saw is cutting any further please check that the saw is ...
...saw unplugged - The blade needs to be locked in place so it will not turn when you put a wrench on the nut located on the left side of the blade that holds the blade on. This is done with a locking ...
...blade, on the back of the saw are 2 10MM bolts that you need to loosen put your square at the front again and lock down the handle with that done move the square to the back and tap the rail on the ...
...side of the blade to check it. If it is out of square you would need to loosen the fence bolts (13MM) and adjust the fence, snug bolts on the left side and move your square to the right and recheck ...
...circular saw, blade moves side to side about an eigth of an inch. The bushing on the shaft appears short allowing some movement. Does any one know a fix for this? Some things like this we have to ...
how to change the blade first look for small button in the opositive side of blade, smash on it, move the blade till stops and then remove nut......
...circular saw There are typically two adjustments on the saw, both of which operate with a wingnut type of screw/bolt. The one in the front of the saw adjusts the angle of the blade (typically front ...
blade side of the saw, the spring hooks through a hole at about three o'clock on the lower guard. It then wraps around the bottom of the guard clockwise and attaches to the upper guard.
1 questions posted
Usually answered in minutes!
2 Questions
1 Questions
1 Questions
