brine tank drainage problem Kinetico Water Softening Unit has brine tank filling with water and now water inside house is rusty. This sounds like the resin cylinder is perforated or connections at the
...in brine tank of whirlpool whes30 water softener Brine tanks are normally always precharged with water ready for next regeneration. It also allows contact time to ensure correct brine
brine tank and the softener valve. disassemble the connection, cut back the tubing and reconnect. Other things to look for are low water pressure, the unit requires 25 psi minimum during regeneration.
brine tank is stuck or there is dirt in the screen at the top of the hose out of the brine tank that is stopping the brine from being sucked up the hose. First empty the tank and then you can see what
...brine tank. Always keep salt/brine tank at least half full. If you want to run a manual regeneration push the regen button. For delayed regeneration (2am) push once, for immediate regeneration push ...
...brine tank),or the resin could be worn out. Start by checking the salt tank, if it looks like the salt has solidified, use a broomstick or piece of pipe to break up the salt. A rubber mallet can also ...
...brine position .. removed the motor to confirm it's not the problem .. still jammed? Have the timer off the tank and it still jams? Most likely it's NOT the motor...If you can remove the entire timer ...
brine tank fill tube or the safety float, and make sure the connections are tight, and the tube is not brittle or cracked. If so, then the unit will not draw the correct amount of brine if any at all,
not using salt There may a salt bridge in the salt tank. Eductor nozzle may be plugged preventing brine draw. What model softener is it? RJ
...brine tank, water flows well to it yet still get yellowish colored water even after regenerating it 4 times. I'm on city water. kissfreak- Yellow water sounds like a problem with iron. ...
87 questions posted
Usually answered in minutes!