Whirlpool 6060 DL Corner Pro-Fit Acrylic 6041 "jetted tub turning" Questions

jetted tub, or a air bath tub with holes or jets in the floor? If it has holes or jets in the floor, the control box is bad and needs replaced. If it is a jetted tub, there may be a water level sensor

water coming out of adjustable air vent behind wall of tub one or more of the jets are turned off. i would suspect someone is plugging the jets off which causes water to go backwards in the system and

Kohler K1338 spa tub controls messing up Kohler K1338 spa tub Back jets in the bottom position. If I turn up neck jet speed, that resets the back jets unless I press the down arrow on the neck jets ...

turning on the tub only 3 of 6 jets are working, 2 of them feel like they are trying to work. suggestions? Make sure the jets themselves are fully opened. Some models you can turn individual jets on &

Two jets stopped working One of the jets in the back of the tub stopped working a few weeks ago and now the second jet in the back has quit working. The tub is only a year and half old and is in a ...

Jets not working I have a Neptune jet tub. The motor turns on when I press on but there is NO air coming from the jets. What do I do? Check your breaker in the breaker box. Is this an air tub or a ...

need to find out why 2 of the 6 jets on my acer swirl bath tub don't push water out like the other 4, and where can I find replacement jets. We bought the home recently and it was built in 2000. ...

...tub is praticaly new. Thank you for anwsering. Not normal for that to happen but the jet faces on the two back jets may be turned off or down. Try turning the face of the jet clockwise and see if you ...

We have purchased a whirlpool tub model # 1714019020. It has side jets & 4 jets at the back. Can you tell me if there is some way to adjust the back jets or to turn them off as they spray water ...

...jetted tub. We used our new jetted tub and the jets didn't turn on. There is no instruction manual. First the obvious, most are electrically connected to a ground fault device, ether an outlet or a ...