Porter Cable RN175 Roofing Coil Nailer "replace trigger valve" Questions

...replace the trigger valve, remove nails for safety and the trigger to expose the valve. Remove the rollpins holding the valve into body. Apply air to gun and catch the valve as it pops out with a ...

...trigger valve with a new single fire trigger to see if the old bump fire trigger was the problem N80S stick gaming nail gun Remove the nails and take off the trigger to expose the trigger valve ...

...replace the trigger assembly or just the o-rings I have repaird hundreds of nail guns with a problem similar to yours. Depending on the brand and model, the problem can be repaired by checking the ...

...replace the seals for the trigger in my gun but I just cant seem to figure out how to remove the trigger asym..... I am talking about the piston that releases the air inside the grip. Thanks for any ...

...trigger valve may need replacing. I own a Bostich 15ga. nailer that leaked around the trigger valve and there's a complete valve kit that I purchased and installed myself in under 10 minutes that ...

in valve by trigger parts place online says valve on unknown backorder help should be several places to get a new trigger valve. If your valve is a green color you definitlry need to replace the valve

...the trigger valve) or just replace the whole trigger assembly (under $10). Lube all orings with white grease or silicone paste lube (remove head and lube head valve assembly).   Good ...

...trigger valve to replace the original (part number 5140095-73). Not sure if the new valve is replacement to address an issue or natural progression. I would also replace the orings that make contact ...

...trigger valve has about five orings and will usually begin to leak before it fails. Replace the valve with a (#TVA6) valve available at www.toolpartsdirect.com or universal trigger valve from ...