Question about Tools & Hardware - Others
water in salt tank looked bad so i drained it should i put a couple of gallons of water in the salt tank after draining it to get circulation back again ? water softener is not conditioning water The ...
Question about Culligan Tools & Hardware - Others
ran out of salt refilled and it is not softening Don't you get it? Salt is required for the softener to work. Pepper is not a replacement.
Question about Culligan Tools & Hardware - Others
I want to dig a pit for the backwash off my iron filter. How deep, big around, how many levels of crush how many diffrnt sizes of crush Great question! More people should do this! The dry well and all
Foul Odor There is a foul odor that is coming from our Culligan Water Softner. Any ideas? Odor from the water softening system can be attributed to several causes. The best way to see if it is coming ...
Question about Culligan Tools & Hardware - Others
The brine tank on my Culligan Mark 89 softener is leaking. Where can I get a reasonably priced replacement? Most Culligan brine tanks have a lifetime warranty. Check with the dealer for a free ...
Question about Culligan Tools & Hardware - Others
there is a constant discharge of water running into the drain. What could be causing this? If it is the water softener it is running to drain and needs to be serviced asap. RJ
It is running continuously and the screen only shows a small phone The small phone means CALL SERVICE there's a problem. It is running to drain and needs to be serviced. Bypass the softener until ...
Question about Tools & Hardware - Others
Culligan mc450 constantly dripping through overflow pipe. Any ideas what I should do.? Overflow constantly dripping. Not sure why or what to do. If it is running at the drain for the softener, it has ...
how can I drain a water softener tell me how to drain Are you talking about the resin bed or the salt reservoir? Salt Reservoir ~ Remove as much salt as possible then dump the water out. Resin Bed ~ ...
Question about Culligan Tools & Hardware - Others
cleaning the filter screen under the metal cover plate. Also check your water supply pressure. Some softeners won't run properly on low pressure. Try cleaning the venturi valve
67 questions posted
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions