Omega Paslode 901000 Impulse Cordless Finish Nailer "cleaning gas gun" Questions

...on fan on gun cleaned wont fire gun cleaned battery ok gas ok fan on Does it flash when you pull the trigger? Does the fan start? What model? Is the gas in date? Is the inlet valve the correct way

...gun. I removed and cleaned the spark plug cover, dried everything in sight. I added a couple of drops of oil (all products are Paslode ones). I put in a new gas cartridge. (Yes, I did check that the ...

fires a nail and then does,nt very irregular. i have cleaned the gas chamber but still very inconsistant ,wondering if it is a problem with the electric circuit. i have two hitachi guns and had a ...

...Gun was not working before I cleaned it. Cleaned it and still does not work. It sounds like it is going to work but does not fire. What do I do? first check to make sure your gas cylinder is not ...

...GUN EVERY THING SOUNDS OK BUT NOT FIRING CHANGED GAS and battery Pull the top off and clean the spark plug with a carb cleaner spray. Check gas canister ...make sure it's not empty.. Do you get a ...

I have a NR 90GC Hitachi nail gun, it needs excessive pressure on contact tip before it will fire, any suggestions? Thanks. Hi, Did it get dropped? The lower safety might be bent. If not, when`s the ...

...the gas chamber is full. the gun is missfiring Hi there, Has the tool been striped down and cleaned lately? And are you using genuine paslode gas? If not, do these two fixes first and try

cleaning.. if it still does not fire you might have to replace the spark plug. check gas expiration date or could be bad gas Check to make sure the driver is returning to the start position. If it isn

...Gun is well cleaned and oiled and gas is well in date . This problem is only intermitent but is really annoying as you have to push pin back every time it sticks. Yes,this is a common "mis fire" by ...