Question about Poulan Tools & Hardware - Others
fuel line should be long enough to teach from where it attaches to the carberator to the fuel tank but not quite touching the bottom - however the line in the tank end should have a small filter on it
Question about Poulan Tools & Hardware - Others
...5 minutes replaces plugs, cleaned air filter. Could it be gas cap vent? replace diaphrams in carby. clean or replace filter in tank on end of fuel line Ensure fuel cap allows ventilation for
...replace) 2) The line between the bulb mount and the fuel tank is split or has fallen/been pulled off (this frequently occurs as well) 3) The fuel tank filter has trash on it and is preventing the ...
Question about Poulan Tools & Hardware - Others
...there is a vent on the tank or on fuel cap. There is usually a valve on this to allow air into tank to replace fuel as it leaves for the carburettor. Ensure this isn't blocked. Hope this helps
Question about Poulan Tools & Hardware - Others
...Replace the plug if suspect, very inexpensive. Ask at parts store about gap (I can find no reference). I would try a little fuel mix into the carburetor throat with the choke open and the fast idle ...
...fuel line, or the diaphragms in the carburetor need replaced. Make sure you the fuel filter is clean. Clean it off with some gumout spray. If your fuel lines are not cracked, then I would suggest a ...
126 questions posted
Usually answered in minutes!
36 Questions
9 Questions